If you want to get your audio system up and running, you’ll need to know how to hook up two amps with one power wire. This is a fairly straightforward procedure, but it’s important to understand the basics before you start. This article will walk you through the steps you’ll need to take in order to get two amps connected and ready to go.
Important Considerations
Before you start, there are a few important considerations you should keep in mind. First, you’ll need to make sure that the power wire you’re using is rated for the total amount of current your two amps will draw. If it’s not, you could end up with a blown fuse or worse. Additionally, it’s important to make sure that your power wire is connected securely to both amps and that all connections are insulated with electrical tape or shrink tubing.
Step 1: Connect the Power Wire to the 1st Amp
- Locate the power input on the first amp.
- Connect the positive (red) wire to the positive terminal and the negative (black) wire to the negative terminal.
Step 2: Connect the Power Wire to the 2nd Amp
- Locate the power input on the second amp.
- Connect the positive (red) wire to the positive terminal and the negative (black) wire to the negative terminal.
Step 3: Test the Connection
- Turn on both amps.
- Test the connection by playing some music or a tone generator through your audio system.
If all goes well, you should be able to hear the sound clearly from both amps. If not, check your connections and make sure all the wires are securely connected.
Conclusion
Hooking up two amps with one power wire is a fairly simple process, but it’s important to make sure all the connections are secure and the power wire is rated for the total amount of current your two amps will draw. With the right equipment and a little patience, you can get your audio system up and running in no time.